DK300 Power Pull Frame Machine

Kuhn Manufacturing on Facebook 767-6662
Kuhn Manufacturing
Auto body repair equipment since 1967
DK300 Power Pull Frame Machine

DK300 Power Pull Frame Machine

The DK300 is the industry standard, all other pull towers fall short of quality of materials and manufacture. Ease of use, height adjustment up to 106", continuos pulling via the DK100 Locking Dog that locks on half or full lengths of chain then disengages as a new pull begins. Our proprietory ductal cast iron 6" wide body sheaves (pulley) supports pull chain during heavy pulls. Pins'are 3/4" heat treated 4140 alloy for strength and longevity.

With over 45 years of field proven use the DK300 was designed during the height of full framed vehicles when most all pulls were heavy pulls. When used with a complete DK355 Anchor Pot pattern and the DKEB2012 Profit Max the shop floor becomes a frame machine.

Optionally, use the DK264A Pulley Kit Accessory to double the tonnage of your frame pulls.

DK264A Pully Kit Doubles Pull Tonnage

DK300 Frame Machine ComponentsDK300 Frame Machine Instructions

DK300 Power Pull Frame Machine Features & Accessories

D203 Floating Pulley

D203 Floating Pulley

The D203 Floating Pulley anchor chain tail eliminates any twisting of its yoke when the post is positioned between floor anchors. More vertical post holes allow a greater selection of pulls.

6 Inch Pulley

Wide Bodied, 6" Pulley

Kuhn 6’ pulley with wide-bodied cast chain grove supports 3/8” chain around the half circle without bending links during the pull. Smaller pulleys do not support chain links as well.

DK300 Lever Arm

DK300 Lever Arm

Kuhn fully suspended ram allows free travel through the lever arc without putting stress on the ram shaft seals.

DK100 Locking Dog

D100 Locking Dog

The D100 Locking Dog allows continuous pulling after the pull ram is fully extended, the D100 will engage a full or half link of chain. Pull tension is maintained during ram release, the D100 Locking Dog automatically disengages the chain when the pull is resumed.

DK304 Push Attachment

DK304 Push Attachment

Precisely push with 10 tons.  All Kuhn pins are manufactured from 3/4" 4140 Alloy Steel and heat treated for strength and longevity.

DK264A Power Pulley Kit

DK264 Power Pully Kit

Includes DK263 Down Pulley and DK264 Power Pivot with Shaft.

Whether using the frame machine for a low or standard pull, the DK264 doubles the puller tonnage.

DK253 Chain With Hook

Grade 80 Chain with Hook

3/8" Grade 80 Alloy Chain with Hook

DK253: 6'
DK555: 8'
DK556: 10'
DK252: 11'
DK211: 3/8" Grade 80 Grab Hook

DK259 Choker Chain

DK259 Choker Chain

3/8" Grade 80 Alloy Chain with Hooks

DK257 Mini Pull Post

DK257 Mini Post

Dead hold mini post

DK301 Power Pull Extension

Power Pull Extensions

DK301: 21" Power Pull Frame Machine Extension

DK301: 47" Power Pull Frame Machine Extension

DK302 Boom Lift

DK302 Boom Lift

Boom lift for frame machine vertical up-pulls.

DK303 Engine Lift Bar

DK303 Engine Lift Bar

Use with DK302 Boom Lift. Supports engine and transmission during chassis repair.

DK300 Frame Machine ComponentsDK300 Frame Machine Instructions

Site Terms/Agreement • TM Trademark ® Registered Trademarks ©2014 Kuhn Mfg. Co., Inc. • All Rights Reserved.